Herne Bay · Beltinge · Greenhill · CT6

Solar panels for Herne Bay, Beltinge and Greenhill.

Two routes: a DIY plug-in kit from £499 for a fence, balcony or garden-mounted setup, or a full MCS-certified rooftop install from around £5,000 for SEG export income and battery backup. Conservation-area and DNO guidance built into every quote, not an afterthought.

Two routes

From balcony kit to full rooftop, pick what actually suits your house.

Early 19th-century terraces on the seafront, later housing further out towards Beltinge: what suits one rarely suits the other.

DIY plug-in solar

From £499, half a day to fit. Plugs into an existing socket rather than your consumer unit, so it stays outside MCS and DNO pre-approval territory entirely, provided you stay under the 800W envelope.

MCS-certified rooftop install

From around £5,000. Wired into the consumer unit and MCS-certified, the route that gets you SEG export income, EV charger integration and 0% VAT. G99 notification is on us.

Electrical services

Fuse box replacement, home rewires, EV chargers, EICR inspections, PAT testing and fault-finding across Herne Bay, Beltinge and Greenhill.

FAQs

Common questions in Herne Bay

Can I fit solar panels on a Herne Bay Conservation Area property?

Often yes without full planning permission, provided the panels sit on a rear or side roof slope that doesn't face the highway. The Herne Bay Conservation Area, home to 41 Grade II listed buildings including Telford Terrace and the Hanover, Brunswick and Oxenden squares, restricts front-facing, highway-visible installations more tightly. If your property is individually listed, you need listed building consent regardless of which roof slope, though this is not automatically refused, especially for non-visible slopes.

Do I need DNO approval for solar in Herne Bay?

Systems up to 3.68kW per phase fall under G98: you can install first and notify UK Power Networks Southern within 28 days. Anything larger, or any system with an export-capable battery over that threshold, needs G99 approval before work starts, which typically takes 6 to 16 weeks depending on local network capacity.

What does DIY plug-in solar cost in Herne Bay?

From £499 for a basic balcony or fence-mounted plug-in kit under the roughly 800W envelope that doesn't require DNO pre-approval. Full MCS-certified rooftop installs for SEG export income typically start around £5,000 depending on roof size and battery inclusion.

Conservation areas

41 listed buildings sit inside the Herne Bay Conservation Area.

Herne Bay's seafront developed from Hacker's plan to extend the Oxenden Estate, laying out a new High Street and three squares in line, Hanover, Brunswick and Oxenden, east to west. Telford Terrace, nine sea-front houses from 1834, and the stuccoed early 19th-century terraces around Marine Terrace are among the conservation area's 41 Grade II listed buildings. The rule that actually matters for solar: panels on a rear or side roof slope not facing the highway usually count as permitted development, but front-facing, highway-visible panels normally need planning permission, and listed properties need listed building consent regardless of roof slope, though this isn't automatically refused for a non-visible slope. We check this before we quote, not after you've ordered panels.

See how this affects an MCS install →

Where we work

From the promenade to Beltinge.

CT6, following the coast east from the Herne Bay seafront out to Beltinge.

Herne Bay seafront

Herne Bay Conservation Area, Telford Terrace, Hanover, Brunswick and Oxenden squares. Rear-slope mounting is usually the cleaner planning route here.

Greenhill

Later Victorian housing inland of the seafront, generally fewer listed-building restrictions.

Eddington

20th-century housing further from the seafront, straightforward rooftop installs.

Beltinge

Eastern suburb towards Reculver, mostly 20th-century housing, good south-facing potential on many roofs.

Full coverage area →

Get a free solar quote for Herne Bay.

Send your address and a photo of your roof or the spot you'd plug a kit into. We'll tell you honestly which route fits and flag any conservation-area question before you commit to anything.